|
|
|
Short
bolt offset pushrod
|
Short Bolt Offset Pushrod
Orders that are
canceled will be refunded less the 3-6% fee that PayPal no longer
returns when a refund is issued.
Back to Parts List Page
|
Long
bolt offset pushrod
|
Orders that are
canceled will be refunded less the 3-6% fee that PayPal no longer
returns when a refund is issued.
Back to Parts List Page
|
These
pushrods were originaly designed for the classic Mustange however they
could be made to work in other applications. They allow you to attach
the master cylinder push rod to the clutch pedal with out having to
drill a new hole in the pedal. If you are wanting to use this pushrod
with somthing other than a Mustang pleas contact me so we can discuss
it further. This 3/8" grade 8 offset pushrod replace the the
stock 5/16" pushrod that comes with CNC or Willwood master cylinders
and allows you to connect the master cylinder to the original clutch
linkage hole on the pedal (for a Mustang. The advantage to using the
stock pedal hole is that it provides a better pedal ratio witch
translates to better leverage, easier pedal effort, and better over all
feel as to what the clutch is doing. This pushrod will require you to
remove the snap ring and retaining washer that holds the original
pushrod in the master cylinder. The original retaining washer and snap
ring will need to be reused when reinstalling the new pushrod, but In
most cases the retaining washer will need to be drilled out to 7/16" to
accommodate the larger 3/8" pushrod.
|
International
Shipping Available.
Email me for additional cost
information
New
and reproduction parts
If
you need to order replacement reproduction parts for your Mustang make
sure you check out Steve's Mustang Parts.
|
|
©
2020 Rosehill Performance Parts
The words / logos for Ford, Mustang, etc are used for
descriptive and reference purposes only. Rosehill
Performance Parts is neither affiliated
with Ford Motor Company nor the
manufacturers/distributors of Ford or other automobiles. |
|
