Orders that are
canceled will be refunded less the 3-6% fee that PayPal no longer
returns when a refund is issued. Back to Parts List Page
USA
MADE!!! These T5 crossmembers are used when converting a 1965-70
Mustang to a T5 - 5 speed Transmission. This unit is coated in industrial based enamel paint for
many years of protection.
Our T5 crossmembers are unique since both mounting holes are slotted
for easier adjustment and allows you to fine tune your driveline
centerline!!! Don't buy the cheap ones that don't FIT!!! These cars are
over 40 years old and all of the transmission holes are NOT the same.
These units are made of 1.5" 13ga tubing and are strong!!!
The 65-66 emergency brake mount is in the correct position so you do
not have to bend up your emergency brake lever and will keep your cable
in the proper area. Keep those cables away from the ground. 67+ do not
have a built in emergency brake bracket.
NOTE: The T5 is physically taller than a C4 or manual transmission.
Crossmember may interfere with with some dual exhaust systems due to
the lower transmission. Modifications to the exhaust system may
be required.
New
and reproduction parts
If
you need to order replacement reproduction parts for your Mustang make
sure you check out Steve's Mustang Parts.